Capacities And Specifications - 3.7L - Ford TRANSIT 2015 Owner's Manual

Only use fluid that meets Ford
specifications. Motor oils of the
recommended viscosity grade that meet
API SN requirements and display the API
Certification Mark for gasoline engines are
also acceptable. Do not use oil labeled
with API SN service category unless the
label also displays the API certification
mark.
E142732
An oil that displays this symbol conforms
to current engine, emission system and
fuel economy performance standards of
the International Lubricant Standardization
and Approval Committee (ILSAC).
Note: Do not use supplemental engine oil
additives. They are unnecessary and could
lead to engine damage that is not covered
by Ford s warranty.
Capacities
Engine lubrication system – including the oil filter
Engine lubrication system – excluding the oil filter
Engine oil top-up – raise the level on the dipstick
from minimum to maximum
Transit (TTH) Canada/United States of America, enUSA, Edition date: 03/2014
Capacities and Specifications
Item
Use only Motorcraft DOT 4 LV High
Performance Brake Fluid, or equivalent,
meeting WSS-M6C65-A2 or ISO 4925
Class 6. Use of any fluid other than the
recommended fluid may cause brake
system damage.
Use multi-purpose grease for door latches,
hood latch, auxiliary hood latch, trunk latch
and seat tracks.
If you use oil and fluids that do not meet
the defined specification and viscosity
grades this may lead to:
• Component damage which may not be
covered by the vehicle Warranty.
• Longer engine cranking periods.
• Increased emission levels.
• Reduced engine performance.
• Reduced fuel economy.
• Degraded brake performance.
CAPACITIES AND
SPECIFICATIONS - 3.7L
WARNING
The air conditioning refrigerant
system contains refrigerant R-134a
under high pressure. Only qualified
personnel should service the air
conditioning refrigerant system. Opening
the air conditioning refrigerant system can
cause personal injury.
274
Capacity
6 qt (5.7 L)
5.5 qt (5.2 L)
1 qt (0.9 L)