Ford TRANSIT 2015 Owner's Manual page 239

• Standard load: A class of
P-metric or Metric tires
designed to carry a maximum
load at set pressure. For
example: for P-metric tires
35 psi (2.4 bar) or 36 psi
(2.5 bar) depending on tire size
and for Metric tires 36 psi
(2.5 bar). Increasing the
inflation pressure beyond this
pressure will not increase the
tire capability.
• Extra load: A class of P-metric
or Metric tires designed to carry
a heavier maximum load at
42 psi (2.9 bar). Increasing the
inflation pressure beyond this
pressure will not increase the
tire's load carrying capability.
• bar Metric unit of atmospheric
pressure.
• kPa: Kilopascal, a metric unit
of air pressure.
• PSI: Pounds per square inch, a
standard unit of air pressure.
• Cold tire pressure: The tire
pressure when the vehicle has
been stationary and out of
direct sunlight for an hour or
more and prior to the vehicle
being driven for 1 mi (1.6 km).
Transit (TTH) Canada/United States of America, enUSA, Edition date: 03/2014
Wheels and Tires
•
•
•
•
•
•
Information Contained on the
Tire Sidewall
United States of America, and
Canada Federal regulations
require tire manufacturers to place
standardized information on the
sidewall of all tires. This
information identifies and
236
Recommended inflation
pressure: The cold inflation
pressure found on the Safety
Compliance Certification Label
(affixed to either the door hinge
pillar, door-latch post, or the
door edge that meets the
door-latch post, next to the
driver seating position) or Tire
Label located on the B-Pillar or
the edge of the driver door.
B-pillar: The structural
member at the side of the
vehicle behind the front door.
Bead area of the tire: Area of
the tire next to the rim.
Sidewall of the tire: Area
between the bead area and the
tread.
Tread area of the tire: Area of
the perimeter of the tire that
contacts the road when
mounted on the vehicle.
Rim: The metal support
(wheel) for a tire or a tire and
tube assembly upon which the
tire beads are seated.