Using Voice Recognition; Initiating A Voice Session - Ford TRANSIT 2015 Owner's Manual

Hide thumbs Also See for TRANSIT 2015:
Table of Contents

Advertisement

System data cannot be accessed without
special equipment and access to the
vehicle's SYNC module. Ford Motor
Company and Ford of Canada will not
access the system data for any purpose
other than as described absent consent, a
court order, or where required by law
enforcement, other government
authorities, or other third parties acting
with lawful authority. Other parties may
seek to access the information
independently of Ford Motor Company and
Ford of Canada. For further privacy
information, see the sections on 911 Assist,
Vehicle Health Report, and Traffic,
Directions and Information.

USING VOICE RECOGNITION

This system helps you control many
features using voice commands. This
allows you to keep your hands on the
wheel and focus on what is in front of you.
You can then say any of the following:
Voice command
Bluetooth audio
(cancel | stop | exit)
((line | AV | audio video)
in | AUX | audio video)
mobile (apps | applica-
tions)
Transit (TTH) Canada/United States of America, enUSA, Edition date: 03/2014
SYNC
Helpful Hints

Initiating a Voice Session

E142599
Voice Control (page 62).
A tone sounds and the following
message appears in the information
display.
If you want the system to carry out the following
Stream audio from your phone.
Cancel the requested action.
Access the device connected to the auxiliary input jack.
Access mobile applications.
302
Make sure the interior of your vehicle is
as quiet as possible. Wind noise from
open windows and road vibrations may
prevent the system from correctly
recognizing spoken commands.
After pressing the voice button, wait
until after the tone sounds and
Listening appears before saying a
command. Any command spoken
before this does not register with the
system.
Speak naturally, without long pauses
between words.
At any time, you can interrupt the
system while it is speaking by pressing
the voice button.
Initiate a voice session by
pressing the voice button on the
steering wheel controls. See
Message
Listening

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents