Capacities And Specifications - 3.7L - Ford TRANSIT 2017 Owner's Manual

If you are unable to find an engine oil that
meets the specifications defined by
WSS-M2C946-A, it is acceptable to use a
SAE 5W-30 engine oil that meets API SN
requirements and displays the API
Certification Mark for gasoline engines.
Note: Do not use more than 1.1 qt (1 L) of
the alternative engine oil between
scheduled service intervals.
Using oil and fluids that do not meet the
defined specification and viscosity grade
may lead to:
• Component damage which may not be
covered by the vehicle Warranty.
• Longer engine cranking periods.
• Increased emission levels.
• Reduced engine performance.
Capacities
Engine oil fill capacity including the oil filter.
Engine oil fill capacity excluding the oil filter.
Engine coolant fill capacity, vehicles with an auxiliary
heater.
Engine coolant fill capacity, vehicles without an
auxiliary heater.
Automatic transmission fluid fill capacity.
Rear axle fluid fill capacity (limited slip differential).
2
Rear axle fluid fill capacity (conventional differen-
tial).
Rear axle friction modifier.
Fuel tank fill capacity.
Washer system fill capacity.
Transit (TTH) Canada/United States of America, HK3J 19A321 AA enUSA, Edition date: 04/2016, First Printing
Capacities and Specifications
Item
• Reduced fuel economy.
• Degraded brake performance.
Do not use supplemental engine oil
additives because they are unnecessary
and could lead to engine damage that may
not be covered by the vehicle Warranty.
CAPACITIES AND
SPECIFICATIONS - 3.7L
WARNING
The air conditioning refrigerant
system contains refrigerant under
high pressure. Only qualified
personnel should service the air
conditioning refrigerant system. Opening
the air conditioning refrigerant system can
cause personal injury.
1
291
Capacity
6 qt (5.7 L)
5.5 qt (5.2 L)
16.4 qt (15.5 L)
14.9 qt (14.1 L)
13.1 qt (12.4 L)
2.9 qt (2.72 L)
3.0 qt (2.84 L)
4.0 fl oz (118 ml)
25.1 gal (95 L)
4.8 qt (4.5 L)