Table of Contents
Advertisement
OSD Operation
OSD Hotkey Navigation
Hotkey navigation can be used under OSD mode. To hotkey select a port from
the OSD, do the following:
1. Activate the OSD by pressing the Ctrl key twice ([Ctrl] [Ctrl]).
Note: 1. If the OSD is already active, when you are at the Main Menu you can
key in the hotkey without first having to press [Ctrl] [Ctrl].
2. You can optionally change the hotkey to the Scroll Lock key (see F6,
below), in which case you would press [Scroll Lock] [Scroll Lock].
2. From the OSD Main Menu, key in the Port ID for the computer you wish to
access (see Port ID Numbering, above, for details), then press [Enter].
The console now controls the computer that you have selected, and the OSD
automatically closes.
When you key in the Port ID, note the following:
M
You must key in the Port ID and press [Enter] within 1 second for each
keypress after pressing the [Ctrl+Alt+Shift] combination.
M
Number keys must be pressed from the regular keyboard; not from the nu-
meric keypad.
M
The keys must be pressed and released one key at a time.
M
If you submit an incorrect Port ID, an error message displays, and you are
returned to the OSD Main Menu.
16
CS-138A User Manual
Advertisement
Table of Contents
