Copying Difficulties; Scanning Difficulties - Brother DCP-J125 User Manual

Printing
(continued)
Difficulty
Photo paper does not feed
correctly.
Machine feeds multiple pages.
There is a paper jam.
Printed pages are not stacked
neatly.
Machine does not print from
® ®
Adobe Illustrator .

Copying Difficulties

Difficulty
Vertical black lines or streaks
appear on copies.
Poor copy results when using the
ADF. (DCP-J715W only)
Vertical black lines or streaks
appear in copies. (DCP-J715W
only)
Fit to Page does not work correctly. Make sure the document is not skewed on the scanner glass. Reposition the

Scanning Difficulties

Difficulty
TWAIN/WIA errors appear when
starting to scan.
Poor scanning results when using
the ADF. (DCP-J715W only)
OCR does not work.
(DCP-J715W only)
48
Suggestions
When you print on Brother Photo paper, load one extra sheet of the same photo
paper in the paper tray. An extra sheet has been included in the paper package
for this purpose.
Clean the paper pick-up rollers. (See Cleaning the paper pick-up rollers
on page 36.)
Make sure the paper is loaded correctly in the paper tray. (See Loading paper and
other print media on page 8.)
Check that more than two types of paper are not loaded in the paper tray at any
one time.
Make sure the paper length guide is set to the correct paper size. Do not extend
the paper tray when you load A5 or smaller size paper. (See Printer jam or paper
jam on page 44.)
Make sure you are using the paper support flap. (See Loading paper and other
print media on page 8.)
Try to reduce the print resolution. (See Printing for Windows
Faxing for Macintosh in the Software User's Guide.)
Suggestions
Vertical black lines or streaks on copies are typically caused by dirt or correction
fluid on the scanner. Clean scanner glass and white plastic above it. (See
Cleaning the scanner glass on page 35.)
Try using the scanner glass. (See Using the scanner glass on page 21.)
Vertical black lines or streaks on copies are typically caused by dirt or correction
fluid on the glass strip. Clean the glass strip. (See Cleaning the scanner glass
on page 35.)
document and try again.
Suggestions
Make sure the Brother TWAIN/WIA driver is chosen as the primary source.
In PaperPort™11SE with OCR, click File, Scan or Get Photo and click Select to
choose the Brother TWAIN/WIA driver. (DCP-J715W only)
Try using the scanner glass. (See Using the scanner glass on page 21.)
Try increasing the scanner resolution.
(Macintosh users)
Presto! PageManager must be downloaded and installed before use.
See Accessing Brother Support (Macintosh) on page 3 for further instructions.
®
or Printing and