Basic Operations; Warning Led Indications - Brother DCP-J125 User Manual

Chapter 1

Basic Operations

The following steps show how to change a
setting in the machine. In this example the
Paper Type setting is changed from
Plain Paper to Inkjet Paper.
a
Press Menu.
b
Press a or b to choose
General Setup.
MENU
MENU
Ink Management
General Setup
Network
Print Reports
Press OK.
c
Press a or b to choose Paper Type.
d
Press d or c to choose Inkjet Paper.
Press OK.
You can see the current setting on the
LCD:
General Setup
General Setup
Paper Type
Paper Size
LCD Settings
Sleep Mode
e
Press Stop/Exit.
6
Select & Press
OK
OK
Select & Press
OK
Inkjet Paper
A4
5Mins

Warning LED indications

1
The Warning LED (light emitting diode) is a
light that shows the status of the machine, as
shown in the table.
LED DCP status
Ready
Off
Cover open
Orange
Cannot Print
Paper error
Other
messages
Description
The DCP is ready for
use.
The cover is open. Close
the cover. (See Error
and Maintenance
messages on page 39.)
Replace the ink cartridge
with a new one. (See
Replacing the ink
cartridges on page 33.)
Put paper in the tray or
clear the paper jam.
Check the LCD
message. (See Error
and Maintenance
messages on page 39.)
Check the LCD
message. (See Error
and Maintenance
messages on page 39.)
1