Making Copies; How To Copy; Stop Copying; Copy Settings - Brother DCP-J125 User Manual

4

Making copies

How to copy

The following steps show the basic copy
operation. For details about each option, see
the Advanced User's Guide.
a
Do one of the following to load your
document:
 Place the document face down in the
ADF. (DCP-J715W only)
(See Using the ADF (DCP-J715W
only) on page 21.)
 Load your document face down on
the scanner glass.
(See Using the scanner glass
on page 21.)
b
Press + or - repeatedly until the number
of copies you want appears (up to 99).
Copy
COPY COPY
Quality Normal
Enlarge/Reduce 100%
Ratio:
1 No. of Copies
c
Press Mono Start or Colour Start.
Note
If you want to sort copies, use the ADF.
(DCP-J715W only)

Stop copying

To stop copying, press Stop/Exit.
4
Press Start
01 01
1
4

Copy settings

You can change the following copy settings.
Press a or b to scroll through the copy
settings. When the setting you want is
highlighted, press OK.
(Basic User's Guide)
For details about changing the following copy
settings, see page 24.

Paper Type

Paper Size
(Advanced User's Guide)
For details about changing the following copy
settings, see chapter 3:

Quality

Enlarge/Reduce

Density

Ink Save Mode
 Stack/Sort (DCP-J715W only)

Page Layout

Book Copy

Watermark Copy

Set New Default

Factory Reset
4
4
4
23