Table of Contents
Advertisement
4/8CH Triplex DVR Combo
5.5. Motion Setup
To setup motion detector configuration
5.5.1. Motion Mode
To select the motion sensitivity scale as "Sensitive OFF", "Sensitive Low", "Sensitive
Normal", "Sensitive High" or "Sensitive Highest".
"Sensitive OFF": No sensitivity
"Sensitive Low": Low sensitive level
"Sensitive Normal": Normal sensitive level
"Sensitive High": High sensitive level
"Sensitive Highest": The highest sensitive level
5.5.2. Record Time
To set the motion's record time as 5sec, 10sec, 15sec, 20sec, 25sec, 30sec, 45sec, 60sec,
90sec, 120sec, 150sec or 180sec
5.5.3. Alarm Mode
To set the motion detector alarm mode.
"Mute": No beep whatever detecting.
"
Buzzer-Short": Beep shortly by buzzer on main board when detection is active
"
Buzzer-Long": Beep long by buzzer on main board when detection is active
"
Alarm-Short": Beep shortly by speaker of system when detection is active
"
Alarm-Long": Beep long by speaker of system when detection is active
5.5.4. Alarm Time
To Setup the time period of beep by "Nonstop"(no stop), 5sec, 10sec, 15sec, 20sec, 25sec,
30sec, 35sec, 40sec, 45sec, 50sec, 55sec or 60sec
5.5.5. Motion Area Setup
Block one area on screen for each channel as motion detection area.
It can be done by mouse or by using
to move the area. After positioning, press "
Digital Video Recorder
( ),
( ),
( ),
( ) buttons (up/down/left/right)
" and save it
34
Advertisement
Table of Contents
