Remote Access Via Internet Explorer - Swann DVR4-5600 Operating Instructions Manual

4 channel h.264 digital video recorder

Hide thumbs Also See for DVR4-5600:

Table of Contents

Remote Access via Internet Explorer

The easiest way to access your DVR remotely is via an Internet browser. These

instructions will detail how to access the DVR via Microsoft Internet Explorer

This section assumes that you've already configured the DVR and your network to

operate properly. Remotely accessing the DVR via Internet Explorer (IE) is a great

way to test if your network is functioning as it should.

Note: You may have to alter and configure the ActiveX controls in IE to allow

unrestricted access to the DVR. Access might be slowed or blocked completely by

IE's built-in security functions. The instructions on how to do this are covered on

the next page.

To access the DVR remotely via Internet Explorer:

Open an

Internet Explorer window. If you do not have Internet Explorer you

can download it from the Microsoft website (www.microsoft.com). Alternately,

you can try using a different

In the address bar type "http://" followed by your

then your web port. For example, if your web port is "85" and your public IP

address is "210.9.10.115", then you'll need to enter:

You will now see a login window. Here, enter your password. If no password

is set, leave this dialog box blank.

You should now have access to the DVR.

http://210.9.10.115:85

public IP address, a colon

Table of Contents