End Of Cycle Signal - Speed Queen 513189R2 User Manual

6. Select optional EXTEND TUMBLE setting to
continue tumbling items at no heat. This
prevents wrinkling when garments cannot be
removed from the dryer immediately. By
turning the EXTEND TUMBLE knob to "ON," the
AUTOMATIC REGULAR/DELICATE and
AUTOMATIC PERMANENT PRESS/KNITS
cycles will tumble an additional 40 minutes.
7. Select timer setting in cycle desired. These
cycles control the drying time.
The ENERGY SAVER settings, marked with an
∗
asterisk ( ), show which dryer settings will use the
least energy and will leave items damp for easier
ironing.
8. Push timer knob in to start dryer.
NOTE: To stop dryer at any time, open the door or
turn timer knob to an OFF position. To restart
dryer, close door, reset timer if necessary, and
push in the timer knob.
DRY2330N
© Copyright, Alliance Laundry Systems LLC - DO NOT COPY or TRANSMIT

End of Cycle Signal

The volume of the signal tone may be set on OFF,
LOUD or between the two selections. If a volume
level is selected, the signal will let you know when
the cycle is done. The signal will stop when the door
is opened, or when the timer is advanced to an OFF
position.
NOTE: The signal will come on every 10 minutes
when the optional EXTEND TUMBLE setting is
selected.
Optional Drying Rack
A drying rack, Part No. 512082, is available at
extra cost through your Factory Authorized
Service Center.
The drying rack can be used for no-tumble drying of
articles such as tennis shoes, sweaters, stuffed
toys or other delicate items.
-10-
513189
DRY2331N
DRY2332N DRY2332N
DRY2332N