Table of Contents
Advertisement
6.
Engage the park brake. Measure the distance
between the D brake bolt and the brake swivel.
The distance should be
7.
If adjustments are needed, loosen C jam nut.
Turn the brake bolt until the distance is correct.
Retighten C jam nuts.
Neutral Adjustments
WARNING!
Neutral adjustments are made with
the rear tires able to rotate. Do not
wear loose clothing or jewelry and
keep hands and feet away from tires.
Neutral adjustments are made with the rear wheels off
the ground and able to rotate, which is done with the
engine running.
1.
Using a jack stand, raise the rear of the mower
up off the ground enough so the tires can
rotate freely. Make sure the machine is securely
supported.
2.
Lift the seat and rotate fully forward until
supported by the seat rod.
3.
Unplug the safety switch and harness from the
seat.
4.
Using two
/
" wrenches, loosen the jam nut
9
16
next to the turnbuckle. (See illustration.)
5.
Hold down the safety switch plunger and start
the engine. Continue to hold the plunger down
during the next two steps.
6.
Keeping the drive levers in the neutral lock
position, release the parking brake. The drive
wheels should NoT rotate.
7.
If the drive wheels rotate, turn the turnbuckle
until the wheels stop. Release plunger to stop
the engine.
8.
Retighten the jam nut against the turnbuckle.
9.
Duplicate procedure for the opposite wheel.
10.
After adjustments are made, secure safety
switch and lower the seat.
maINTeNaNCe
/
"-¼".
1
8
/
"-¼" gap with park
1
8
brake engaged
Measure gap
Seat safety switch
1. Jam Nut
2. Turnbuckle
Neutral adjustment
1
2
8065-049
8065-050
8065-049
45
Hide quick links:
Advertisement
Table of Contents
