Stopping The Engine - Husqvarna PZ5426 FX / 966060901 Operator's Manual

Stopping the Engine

For all models, move the throttle to the minimum
position (tortoise symbol). For all models, move the
throttle to the minimum position (tortoise symbol).
If the engine has been worked hard, allow it to
idle a minute in order to attain a normal operating
temperature before stopping. To prevent fouling
the spark plugs, avoid idling the engine for longer
periods.
Propane models - after idling, shut off each cylinder
and allow the engine to run until it stops due to lack of
fuel. There is no risk of spark plug fouling.
• Disengage the mower deck by depressing the
blade switch.
• Raise the mower deck by pressing the foot pedal
forward to the transport position.
• When the machine is standing still, activate the
parking brake by pulling the lever upward.
• Turn the ignition key to the stop position.
• Move the steering controls outward.
• Remove key. To prevent unauthorized use, always
remove key when leaving the mower.
OPeRaTION
Disengage the mower deck and move throttle to minimum
Raise deck to transport position
Place controls in neutral position to stop
8061-013
8065-016
8065-018
37