Table of Contents
Advertisement
Setting up and configuring network and internet connections
Connecting SIMpad via mobile radio (GSM, GPRS or HSCSD
You can set up a connection to the Internet using the SIMpad via mobile
radio. You can connect using a modem card (PC card) or a cell phone
(serial or infrared).
Prerequisites
If you are using a PC card, it must be inserted into the SIMpad (see
Page 15).
Notes on using the infrared interface
Connection to a cell phone via the infrared interface is possible. The cell
phone must have an integrated modem. This lets you use the cell phone
to set up a connection to an Internet or Service Provider.
Infrared Interface for connecting to a cell phone
For the infrared connection, the cell phone must also have an infrared
interface. The infrared diodes of your SIMpad and cell phone must have
"line of sight contact" and may be not more that 0.5 m from each other.
The connection via the infrared interface only functions if the cell phone's
infrared interface is switched on. You will find the relevant function in your
cell phone settings. The transmission speed of the connection to the
Internet depends on the cell phone's modem and the connection
between the cell phone and the Internet service provider. The connection
to the cell phone does not support any other type of data exchange typical
to cell phones (e. g. SMS).
You can find more information at
http://www.my-siemens.com/simpad, click on FAQ.
Infrared interface (diode)
47
Advertisement
Table of Contents
