Table of Contents
Advertisement
The subsequent startup depends on the option selected in the dialog box
Select Connection . For further information, see the relevant chapter.
I-Gate 802.11B
HomeRF
PC Card
Infrared or serial
The I-Gate PC Card has to be plugged into the SIMpad, with the green
LED on the PC Card lit.
The following dialog window appears.
Network Settings
Tap OK . You are then asked if you wish to save the data. Confirm the query
with OK . The data is permanently saved. A confirmation message informs
you that the data has been saved. Tap OK .
There are now two options for accessing the Internet using I-Gate.
The prerequisite is that the AccessPoint is set to the factory default and is
already in operation (connected to ISDN). Otherwise, the Internet provider
account must be configured in the AccessPoint.
If you are using SIMpad for the first time, Internet Explorer (see
page page 49) now starts automatically. If this is a subsequent
configuration, you must now open Internet Explorer by tapping In-
ternet in the
Chapter "Connecting SIMpad to I-Gate", page 14
Chapter "Connecting SIMpad to HomeRF Gate-
way", page 16
Chapter "Using a PC Card to Access the Inter-
net", page 18
Chapter "Connecting SIMpad via Infrared or Se-
rial Interface", page 21
.
Advertisement
Table of Contents
