Table of Contents
Advertisement
Getting started
Activating SIMpad
On/off button:
On/off button
To switch on your SIMpad, press the
above the control key. If the screen remains dark press the
again.
After your SIMpad is switched on for the first time, a checker board screen
is displayed for a few seconds.
Basic settings after SIMpad is switched on for the first time
A welcome screen is displayed after your SIMpad is first switched on.
Follow the instructions on the screen. Subsequently, a number of
important basic settings such as calibration, owner properties and date
and time are requested.
Calibrating the screen
After turning the device on, you are asked to calibrate the screen.
Calibration is necessary to allow the touch-sensitive screen to react
correctly to the pressure point.
10
Only use the stylus supplied for touching the screen. Make sure
that you do not touch the screen with anything with your hands
during operation!
More information about using the stylus can be found in Chapter
"Notes on the stylus" on Page 14.
Tap with the stylus precisely in the centre of the displayed
cross. Hold the stylus in this position for about 1 second. The
cross is moved to another position. Tap in the centre of the
cross again. Repeat the process until calibration is completed.
button on the right of the screen
button
Advertisement
Table of Contents
