Threading The Machine - Husqvarna Viking Eden Rose User Manual

threadinG the MaChine

Turn off the power switch
Make sure the presser foot is raised and
the needle is in the up position.
1. Bring the thread from the spool and
pass it through the thread guide.
Then draw it down along the right
slot.
2. Guide the thread around the bottom
of the thread guide plate.
3. Firmly draw the thread from right to
left over the take-up lever and down
into the take-up lever eye.
4. Slide the thread from the left behind
the needle bar thread guide.
5. Use the needle threader to thread
the needle (see page 17).
16 – Getting Ready to Sew
1
3
4
5
1
2
3
4 5
2