Using The Telephone - Ford Fiesta Owner's Handbook Manual

Incoming calls can be accepted by
pressing the MODE button once. Press
the button again to end the call.

USING THE TELEPHONE

Note: Refer to your audio guide for
details of the controls. See Audio unit
overview (page 151).
This chapter describes the phone
functions of the audio unit.
An active phone must be present.
Even if connected to the audio unit, your
phone can still be used in the usual way.
Note: You can exit the phone menu by
pressing any source button CD, RADIO
or AUX.
Making a call
Dialling a number using voice
control
Phone numbers can be dialled using voice
control. See Telephone commands
(page 180).
Dialling a number using the address
book
You can access your phone address
book via Bluetooth. The entries will appear
in the unit display.
1. Press the PHONE button.
2. Press the arrow buttons until the
phone book is shown.
3. Press the OK button
4. Press the up/down arrow buttons to
select the desired phone number.
Note: Press and hold the up/down arrow
buttons to skip to the next number.
5. Press the OK button to dial the
selected phone number.
Telephone
Dialling a number using the
telephone keypad
If you have an audio unit with a telephone
keypad (buttons 0-9, * and #):
1. Press the PHONE button.
2. Dial the number using the telephone
keypad on the audio unit.
3. Press the OK button.
Note: If you enter an incorrect digit whilst
entering a phone number, press function
button 3 to erase the last digit. A long
press will erase the complete string of
digits.
Ending a call
Calls can be ended by pressing function
button 4.
Audio units without a telephone keypad
can also end a call by pressing the MODE
button on the remote control.
Redialling a number
1. Press the PHONE button.
2. Press the arrow buttons until CALL
LISTS is displayed.
3. Press the OK button.
Note: If the active phone does not
provide a call out list, the last outgoing call
number/entry can be redialled.
4. Press the up/down buttons to select
the desired call list.
5. Press the OK button.
6. Press the up/down buttons to select
the desired phone number.
7. Press the OK button.
Redialling the last dialled number
1. Press the PHONE button.
2. Press the arrow buttons until REDIAL
is displayed.
169