•
TA is turned off, then on again.
•
On certain models, the volume control
is set to zero for four minutes after
which the audio unit will retune to
another traffic station.
Traffic announcement volume
Traffic announcements interrupt normal
broadcasts at a preset minimum level that
is usually louder than normal listening
volumes.
To adjust the preset volume:
•
Use the volume control to make the
necessary adjustment during an
incoming TA broadcast. The display
will show the level selected.
Ending traffic announcements
The audio unit will return to normal
operation at the end of each traffic
announcement. To end the
announcement prematurely, press TA
during the announcement.
Note: If you press TA at any other time
it will switch all announcements off.
Audio unit operation
158