Engine Coolant Check; Washer Fluid Check; Brake And Clutch Fluid Check - Ford Fiesta Owner's Handbook Manual

Hide thumbs Also See for Fiesta:
Table of Contents

Advertisement

Topping up
WARNINGS
Only top up when the engine is cold.
If the engine is hot, wait 10 minutes
for the engine to cool down.
Do not remove the filler cap when
the engine is running.
Remove the filler cap.
CAUTION
Do not top up further than the MAX
mark.
Top up with fluid that meets the Ford
specification. See Technical
specifications (page 126).

ENGINE COOLANT CHECK

Checking the coolant level
WARNING
Do not allow the fluid to touch your
skin or eyes. If this happens, rinse
the affected areas immediately with
plenty of water and contact your doctor.
CAUTION
Make sure that the level is between
the MIN and the MAX marks.
Note: Coolant expands when it is hot.
The level may therefore extend beyond
the MAX mark.
If the level is at the MIN mark, top up
immediately.
Maintenance
Topping up
Unscrew the cap slowly. Any pressure
will escape slowly as you unscrew the
cap.
Do not spill coolant on any part of the
engine.
Do not top up further than the MAX
mark.
Top up with fluid that meets the Ford
specification. See Technical
specifications (page 126).

WASHER FLUID CHECK

The front and rear washer systems are
supplied from the same reservoir.
BRAKE AND CLUTCH FLUID
CHECK
plenty of water and contact your doctor.
possible.
125
WARNINGS
Only top up when the engine is cold.
If the engine is hot, wait 10 minutes
for the engine to cool down.
Do not remove the filler cap when
the engine is running.
Do not remove the filler cap when
the engine is hot. Wait for the engine
to cool down.
CAUTIONS
WARNINGS
Do not allow the fluid to touch your
skin or eyes. If this happens, rinse
the affected areas immediately with
If the level is at the MIN mark, have
the system checked by a properly
trained technician as soon as

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents