Station Preset Buttons; Autostore Control; Traffic Information Control - Ford Fiesta Owner's Handbook Manual

Type 1
• Press the MENU button.
• Select RADIO mode and then SCAN.
• Use the arrow buttons to scan up or
down the selected waveband.
• Press OK to continue listening to a
station.
Type 2
• Press function button 3.
• Use the seek buttons to scan up or
down the selected waveband.
• Press function button 3 again, to
continue listening to a station.

STATION PRESET BUTTONS

This feature allows you to store your
favourite stations so that they can be
recalled by selecting the appropriate
waveband and pressing one of the preset
buttons.
• Select a waveband.
• Tune to the station required.
• Press and hold one of the preset
buttons. A progress bar and message
will appear. When the progress bar
completes the station has been
stored. The audio unit will also mute
momentarily as confirmation.
This can be repeated on each waveband
and for each preset button.
Whilst in radio mode, stored stations can
also be selected by pressing the arrow
up, down, right or OK buttons. Then scroll
to the desired preset station and press
OK.
Note: When you drive to another part of
the country, FM stations that broadcast
on alternative frequencies, and are stored
on preset buttons, may be updated with
the correct frequency for that area.
Audio unit operation
157

AUTOSTORE CONTROL

AutoStore can be used to store the
stations with the strongest signals
available, either from the AM or the FM
waveband.
• Press and hold function button 1 or
the RADIO button.
• When the search is complete, sound
is restored and the strongest signals
are stored on the AutoStore presets.
Note: AutoStore will store up to a
maximum of the 10 strongest signals
available and overwrite the previously
stored stations.
Note: The AutoStore waveband can also
be used to store stations manually in the
same way as other wavebands.
TRAFFIC INFORMATION
CONTROL
Many stations broadcast on the FM
waveband have a TP code to signify that
they carry traffic programme information.
Activating traffic
announcements
Before you can receive traffic
announcements, you must press the TA
button. A 'TA' display will appear to show
the feature is switched on.
If you are already tuned to a station that
broadcasts traffic information, 'TP' will also
be displayed. Otherwise the unit will
search for a traffic programme.
When traffic information is broadcast, it
will automatically interrupt normal radio or
CD playback and 'Traffic announcement
(TA)' will appear in the display.
If a non-traffic station is selected or
recalled using a preset button, the audio
unit will remain on that station unless: