Table of Contents
Advertisement
18
Springs
Spring mounts
Shock absorbers
Hoses
Brake chambers
Slack adjusters
Drums
2015 F-650/750 (f67)
Owners Guide gf, 2nd Printing, April 2014
USA (fus)
Vehicle Inspection Guide
Front suspension
Inspect for leaves that may be:
• Missing
• Broken
• Shifted
• In contact with (or nearly contacting) a tire,
rim, brake drum, frame or body component.
Note: Never apply grease to spring pads.
Inspect the following for cracks, breaks, wear,
damage and tightness:
• Spring hangers
• Bolts
• Bushings
• Axle mounting bolts
• Nuts.
Inspect for any:
• Cracks
• Leaks
• Missing or broken bolts or bushings.
Front brakes
Inspect for cracked, worn or frayed hoses.
Verify all couplings are secure.
Verify:
• There are no cracks or dents
• They are securely mounted.
Inspect for broken, loose or missing parts.
Note: The angle between the push rod and
adjuster arm should be approximately 90 degrees
when the brakes are applied. When pulled by
hand, the push rod should not move more than
approximately 1 inch (2.5 centimeters).
Verify:
• There are no cracks, dents, holes, and no
loose or missing bolts
• The brake linings are not worn, dangerously
thin or contaminated by lubricant.
Hide quick links:
Advertisement
Table of Contents
