Call Queuing - Siemens Hicom 300 Operating Instructions Manual

This feature allows a 2nd call to camp on your extension when you are busy
on a call. Your telephone needs to equipped with a Call Queue key.
The caller will receive ringing tone instead of busy tone.
Activate Call Queuing
- press Call Queue key
- Call Queue LED is on
When you are busy on a call and a 2nd call arrives it will be signalled by the
flashing of your Call Pickup LED, and on all other digital instruments in your
Pickup Group. A ping ring will also alert you to the 2nd call.
If you do not use the Call Pickup feature to answer the 2nd call then the call
will be routed to your Call Forward Preset destination.
10

Call Queuing