Creating A Custom Split-Screen Display - Lorex LH030 ECO BLACKBOX3 SERIES Instruction Manual

15 Using the Main Menu
2. In the Channel drop-down menu, select the channel you wish to configure.
3. Configure the following:
• Channel: Select the channel you wish to configure.
• Privacy Zone: Select ON to enable privacy zones or OFF to disable privacy zones.
• Area Setup: Select the Area1~4 checkboxes to enable up to 4 privacy zones.
4. Click the Setup button next to Mask Area. The Privacy Area setup screen opens.
• Click on a privacy area and drag to change its location.
• Click on the edge of a privacy area and drag to resize a privacy area.
• Right-click when you are finished to exit.
5. (Optional) Use the drop-downs next to Copy to copy privacy areas to another channel
or all channels. Click the Copy button to copy privacy areas.
6. Click Apply to save your settings.

15.1.12 Creating a Custom Split-screen Display

You can create a custom split-screen display and re-arrange where channels are placed.
#LX400008; r. 2.0/12067/12067; en-US
44