Connecting And Removing Bnc Cables - Lorex LH030 ECO BLACKBOX3 SERIES Instruction Manual

6 Basic Setup (LH030 Series)
Camera Installation Diagram
1
2
1. Camera.
2. End of extension cable with male power connector.
3. Extension cable.
4. End of extension cable with female power connector.
5. Camera power adapter.
6. DVR.

6.11.3 Connecting and Removing BNC Cables

BNC (Bayonet Nut Connector) is a special connector that locks on to the system port and
cannot be accidently removed.
To connect or remove a BNC connector:
• Push the BNC connector firmly into the BNC port and simultaneously twist the connec-
tor clockwise to tighten.
• To remove a BNC connector from a BNC port, push and simultaneously twist the con-
nector counter-clockwise to loosen the BNC connector.
#LX400008; r. 2.0/12067/12067; en-US
3
4
6
5
14