7. Turn the bulb socket counterclockwise to
remove it.
8. Install a new bulb.
9. Turn the bulb socket clockwise to reinstall it.
10. Reverse Steps 1 through 6 to reinstall the
taillamp assembly.
When reinstalling the taillamp assembly, make
sure that you line up the four posts on the
assembly with the slots in the vehicle.
348
License Plate Lamp
To replace one of these bulbs:
1. Turn the lamp assembly counterclockwise and
pull the lamp assembly out of the connector.
2. Pull the old bulb from the lamp assembly,
keeping the bulb straight as you pull it out.
3. Install the new bulb.
4. Reverse Steps 1 through 3 to reinstall the
license plate lamp.