Connecting Your Device To Your Computer - Kyocera SANYO ZIO User Manual

2.
Review the available information.
The storage capacity page is divided into two sections:
SD card and Internal phone storage
3.
Touch to return to the previous page.
Formatting the microSD Card
Formatting a microSD card permanently removes all files stored
on the card.
1.
Touch > >
Settings
SD card, USB Mass Storage & phone storage
2.
Touch Unmount SD card
its use by the device. The
to indicate the card is unmounted.
3.
Once released, touch Format SD card
.
Erase everything
Once completely formatted, the card is automatically
remounted (reconnected for use by the device).
Important:
The formatting procedure erases all the data on the
microSD card, after which the files CANNOT be
retrieved. To prevent the loss of important data, please
check the contents before you format the card.
.
>
.
to release the microSD card from
icon appears on the status bar
> Format SD card
Connecting Your Device to Your
Computer
Before using your device's mass storage capabilities, you need to
prepare your device's data services to synchronize with your
desktop or laptop computer. Once you have connected the device
to the computer, you can transfer your data to or from the
microSD card.
1.
Connect your device to your computer using a compatible
USB cable. (Wait for the connection to be completed. When
connected, the host computer will automatically detect your
device.)
2.
The USB icon (
bar on your device.
>
3. Drag the status bar down, or from the Home screen, touch
>
Notifications
4.
Touch
USB connected
computer and your device's microSD card.
5.
Locate the newly created drive letter on your computer. You
can now begin to use the microSD card as a storage device.
) now appears on the left side of the status
to open the Notifications panel.
> to copy files between your
Mount
2G. microSD Card 63