Setting Vibration - Kyocera SANYO ZIO User Manual

2. Touch a ringtone from the available list. The ringtone briefly
plays when selected.
3.
Touch to assign a ringer.
OK
Enabling Other Sound Features
You can set the device to play an audible tone or to vibrate when
you use the phone keypad, touch the screen, or receive SD card
notifications.
1. Touch > >
2. Touch
Audible touch tones
, or
Haptic feedback
feature.
Audible touch tones
keypad.
Audible selection plays a sound when making any
onscreen selection.
vibrates when pressing keys and on
Haptic feedback
certain UI interactions.
SD card notifications
notifications.
32 2B. Settings
>
Settings Sound & display
, ,
Audible selection
to activate the
SD card notifications
plays a tone while using the phone
plays a sound for SD card
Adjusting the Volume Settings
Adjust the volume settings of both the device and Media playback
to suit your needs and your environment.
1.
Touch
2.
Touch either
Note:
If you clear the "Use incoming call volume for notifications"
check box on the ringer volume settings screen, you can
select the notification volume separately.
.
3.
Touch and drag the onscreen slider to adjust the volume
level.
4. Touch
Tip:
You can adjust the ringer volume in standby mode (or the
earpiece volume during a call) by using the volume button on
the left side of your device.

Setting Vibration

To set your device to vibrate instead of making any sounds
(except for media and alarm sounds):
Press the volume button down in standby mode until you see
on the screen.
> > Settings > Sound & display
Ringer volume or Media volume
.
OK
.
.