Tilt Support Lever For Power Trim And Tilt Or Hydro Tilt Model; Top Cowling Lock Lever(S); (Turn Type); Flushing Device - Yamaha F50F Owner's Manual

EMU26340
Tilt support lever for power trim and
tilt or hydro tilt model
To keep the outboard motor in the tilted up
position, lock the tilt support lever to the
clamp bracket.
EMU26372
Top cowling lock lever(s) (turn type)
To remove the engine top cowling, turn the
lock lever(s) and lift off the cowling. When in-
stalling the cowling, check to be sure it fits
properly in the rubber seal. Then lock the
cowling again by returning the lever(s) to the
lock position.

1. Top cowling lock lever(s)

EMU26460

Flushing device

This device is used to clean the cooling wa-
ter passages of the motor using a garden
hose and tap water.
NOTE:
For details on usage, see page 54.
1. Flushing device
ZMU03595
EMU31702

Water separator

This engine has a combination fuel filter/wa-
ter separator and associated warning sys-
tem. If water separated from the fuel
exceeds a specific volume, the warning de-
vice will activate.
1
Activation of warning device
ZMU05093
The water separator warning indicator will
G
blink.
The buzzer will sound intermittently only
G
when the gear shift is in neutral.
If the warning system has activated, stop
G
the engine and consult a Yamaha dealer
immediately.
Basic components
1
ZMU05095
ZMU05474
17