Procedure For Tilting Down (Power Trim And Tilt Models / Power Tilt Models) - Yamaha F50F Owner's Manual

UP
UP
4. Push the tilt support knob into the clamp
bracket or pull the tilt support lever to-
ward you to support the engine.
EWM00260
WARNING
After tilting the outboard motor, be sure
to support it with the tilt support knob or
tilt support lever. Otherwise the outboard
motor could fall back down suddenly if oil
ZMU03639
in the power trim and tilt unit loses pres-
sure.
5. Models equipped with trim rods: Once
the outboard motor is supported with the
tilt support lever, press the power trim
and tilt switch / power tilt switch "
(down) to retract the trim rods.
ECM00250
CAUTION:
Be sure to retract the trim rods complete-
ly during mooring. This protects the rods
from marine growth and corrosion which
could damage the power trim and tilt
mechanism.
EMU28055
Procedure for tilting down (power
trim and tilt models / power tilt
models)
1. Push the power trim and tilt switch / pow-
er tilt switch "
ZMU04194
motor is supported by the tilt rod and the
Operation
ZMU03640
" (up) until the outboard
"
45