Comfort Adjustments; Seat Height Adjustment - Pride Mobility Celebrrity XL Owner's Manual

V I I . C O M F O R T
TILLER ANGLE ADJUSTMENT
You can adjust the tiller infinitely between the
forward stop and the scooter deck.
WARNING! Remove the key before
adjusting the tiller. Never attempt to
adjust the tiller while your Scooter is
in motion.
1. Pull up on the tiller adjustment lever. See figure
10.
2. Move the tiller to a comfortable position.
3. Release the tiller adjustment lever. The tiller will
remain in that position.
NOTE: In order to lower the tiller to the scooter
deck, you must first remove the seat and both
batteries. See VIII. “Disassembly and Assembly.”

SEAT HEIGHT ADJUSTMENT

The seat can be repositioned to one of five different
heights. See figure 11.
1. Remove the seat from your Celebrity XL. See
VIII. “Disassembly and Assembly.”
2. Use the attached ring to pull and remove the ball
detent pin from the seat post tower.
3. Raise or lower the seat post to the desired seat
height.
4. Hold the seat post at that height and match up
the holes in the seat post with the seat post tower.
5. Fully insert the ball detent pin.
6. Replace the seat.
22
A D J U S T M E N T S
TILLER ADJUSTMENT LEVER
Figure 10. Tiller Angle Adjustment
SEAT POST TOWER
Figure 11. Seat Height Adjustment
BALL DETENT PIN
SEAT POST
Celebrity XL