Viii. Disassembly And Assembly - Pride Mobility Celebrrity XL Owner's Manual

V I I I . D I S A S S E M B L Y A N D A S S E M B L Y
6. Unplug both battery harnesses and lift both batteries
off of the Celebrity XL. See figures 19 and 20.
CAUTION! Failing to unplug both battery
harnesses and the front-to-rear connector
prior to further disassembly could result in
permanent damage to your Celebrity XL.
7. If you plan to remove the utility tray, disconnect the 6-
pin motor harness plug. See figure 21. If you do not
plan to remove the utility tray, go to step 9.
NOTE: You can decrease the weight of the rear
component by removing the utility tray.
8. Lift up and remove the utility tray (optional) if you want
to decrease the weight of the rear component. See
figure 22.
9. Pull up on and remove the front basket.
10. Grab the handle grip on the tiller, pull upward on the
release lever, and gently lower the tiller down to the
center of the Celebrity XL chassis until it is fully lowered.
11. Remove the ball detent pins and lift the locking cam
levers. See figures 23 and 24.
12. Separate the front section from the rear section. See
figure 25.
Figure 21. Disconnecting the Motor Harness
26
Figure 19. Unplugging the Battery Harnesses
Figure 20. Lifting the Batteries
Figure 22. Lifting the Utility Tray
Celebrity XL