Tickets With Black Mark (Mark Stock) - Intermec EasyCoder PX4i User Manual

Appendix B — Media Specifications

Tickets With Black Mark (Mark Stock)

120
a
b
c
e
f
d
(f ) Black Mark Y-Position
It is recommended that you place the black mark as close to the
front edge of the ticket as possible. The black mark can be placed
either on the top or at the back of the media.
Media Type Setup: Mark Stock
Note: Handle perforated media carefully to avoid rips or breaks
along the perforations. Broken or ripped perforations, particularly
at the edges, may cause the media to break or misfeed during
printing.
(a) Media Width
Minimum:25 mm (1.00 inches)
Maximum:120 mm (4.72 inches)
(b) Ticket Length
Minimum:20.0 mm (0.8 inches)
Maximum: 6,143 mm (241 inches),
provided there is a sufficient amount of
free SDRAM memory
(c) LSS Detection Position: Variable,
see"Label Stop Sensor" on page
(d) Black Mark Width
Recommended: 10.0 mm (0.39 inches)
Minimum: 5.0 mm (0.20 inches)
Maximum: Full media width
(e) Black Mark Length
Recommended: 3.2 mm (0.13 inches)
Minimum: 1.27 mm (0.05inches)
Maximum: 25.0 mm (0.98 inches)
EasyCoder PX4i User's Guide (IPL Version)
106.