Connecting - VeriFone Vx510 Instructions For Use Manual

POS terminal Vx510
The terminal consists of 4 essential parts:
SCREEN
CARD READER
KEYBOARD
PRINTER
Picture 2. Connecting the terminal to power source
Picture 3. Connecting the terminal to phone line
Available to display several lines of graphical information.
Read the card during pulling it through reader's aperture Card should be pulled
through reader, by pressing it evenly and moving from on end of terminal to
another. There is no importance of pull direction Card's magnetic track must be
pointed to left side of the terminal. (See Picture 5)
Essential keys:
[X] – allows to go to initial state from any situation, except cases during
operation processing by terminal.
[ ] – clear from screen last entered symbol By pressing it again, you can
clear all incorrectly entered symbols and enter it correctly. Errors may be
corrected only before pressing [ ] or "green key".
[alpha] – allow to enter characters (i.e, to enter authorisation code). To
enter characters, at first must be pressed numeric key, on which required
charater is indicated. Then must be pressed key [alpha] , until required
character is displayed on the screen.
[ ] - "green key", by pressing that entering the number of section, amount,
authorisation code and password will be confirmed. It is also used to
execute different terminal functions.
There is built-in thermal printer within terminal, which prints one copy of the
reciept. In most operations the first copy is bank's or enterprise's copy. Paper
roll is hidden under the plastic cover, which may be pushed up when changing
the paper.
7
Instructions for use