Panasonic 308 Installation Instructions Manual page 158

SECTION 400 (Version 3.0) DBS
issue 1 January 1990
FF-4 Ring mode
3 - 4 - 2 Night Time Incoming Call Setting
mode
FF4-2#-( 1 - 73)#-(1- 32)#-(0 or 1)#
Nighttime incoming outside line call
setting table
It is set which incoming outside line call tones are
to sound for each extension during the night and
on holidays.
While it is possibleto make calls from an extension
port not programmed for incoming calls, it is not
possible to use the auto answering function for in
coming calls.
incoming calls are answered by pressing the
relevant line key or utilizing the function for
accessing the set outside line.
Extensions not stored in thistable are not used for
incoming outside line calls.
Setting step 1.
Select Extension pan number:
Setting step 2.
Trunk port number:
Setting step 3.
Setting Data to ring 1 or no ring 0:
(l-7318
(l-32)#
(1 I O)#
The structure of the data storing in the table is as
foltows.
Extension port number 1 #to 72#
1
Trunk port number 1# to 32f
Ringing for set incoming outside line calls in
daytime (Yes: 1 or No: 0)#
And
Number (for UNAReiay Terminal input) 73#
Trunk port number 14 to 32#
1
Ringing for set incoming outside line calls in
daytime (Yes: 1 or No: O)#
Note 1. When program Extension port number
73in the setting step 2 that make to set the
data for ail other ports extension by
automa tically.
Note2. Initially Extension port number I and 2 is
set to ring forattendant :elephone.
-47-