Section 700
S-DBS Operating Instructions
issue
1
July 1990
Vl .o
Assigning
Two
SSD Codes to a Single One-Touch
Key
If you assign a frequently used access code to one SSD code and a telephone number
to a second SSD code, you can dial the telephone number by entering the first SSD
code followed by the second SSD code. However, both SSD codes can be programmed
on a One-Touch key.
1.
Press ON/OFF key
2.
Press PROG key
3.
Press the One-Touch key
-
---.._
4:
-- --
Press AUTO key
-- -
5.
Key in the first SSD code for the access code.
6.
Press REDIAL key to insert a pause between the access code and the
telephone number if necessary. Repeat for a longer pause.
8.
Key in the second SSD code for the telephone number.
9.
Press HOLD key
10.
Press ON/OFF key
_.- ~- - .--- ..-- .- .