Phone Mode; Connect Mobile Phone Or Bluetooth ® Device To; Navigation System; Overview - Skoda AMUNDSEN+ Owner's Manual

PHONE mode

Connect mobile phone or Bluetooth

navigation system

To operate a mobile phone or other Bluetooth
tem, a one-off connection of both devices is required.
Active connection
When the connection is active, the device search is launched from the navigation
system.
®
Enable Bluetooth on your mobile phone.
Press the button → .
PHONE SETUP
■ - Settings for the Bluetooth
Bluetooth settings
- Search for external devices with an activated Bluetooth
■
Search for devices
function
The search can take around 15 to 20 seconds. When the process is complete, the
name of the Bluetooth devices is shown in the screen.
You can search for the mobile phone you want to connect directly by pressing the
function key with the name of the mobile phone or you can search for it by turning
the button before pressing the button
15
Activate the connection on the mobile phone and enter the 4-digit PIN code in the
screen of the radio navigation system.
If the entry is correct, the message appears in the display that the connection was
successful.
Passive connection
When the connection is passive, the device search is launched from the mobile
telephone.
®
Enable Bluetooth on your mobile phone.
Press the button .
PHONE → SETUP
- Settings for the Bluetooth
■ Bluetooth settings
- Switch on visibility of the navigation system on other
■ Set Bluetooth visibility
®
devices with the Bluetooth
®
device to
®
device from the navigation sys-
®
- function
.
Connect
®
- function
function
Launch the search for Bluetooth
search can take around 15 to 20 seconds. Once the search is complete, the naviga-
tion system is displayed on the mobile phone as SKODA_BT.
Enter the connection on the mobile phone and enter the 4-digit PIN code in the
screen of the navigation system.
If the entry is correct, the message appears in the display that the connection was
successful.
Deleting connected devices
A maximum of 4 mobile phones or Bluetooth
navigation systems. To connect an additional device, a mobile phone or Blue-
®
tooth device must be deleted first.
Press the button →
PHONE SETUP
®
■ - Settings for the Bluetooth
Bluetooth settings
- List of devices connected with the radio navigation system
■
Paired device list
- Delete the selected connected mobile phone or Bluetooth
■ Delete
vice.

Overview

Main menu PHONE
Main menu TELEPHONE
Press the button .
PHONE
Individual functions in the menu PHONE may depend on the equipment and the
properties of the connected mobile phone.
The mode can only be activated while the ignition is switched on.
PHONE
When switching on the navigation system, this automatically connects with the
mobile phone with which it was last connected. If it is not possible to connect
with this mobile phone, the system automatically attempts to establish the con-
nection to the next mobile phone which is in the list of the connected devices.
PHONE mode
®
audio accessories on the mobile phone. The
®
devices can be connected with the
.
®
- function
15
®
de-
Ð
