Dirt Devil Swift Stick Owner's Manual page 5

HOW TO USE AS A STICK VAC
1. Hold body of unit in an upright position (Diagram 1).
2. With upper handle grip facing the left, insert handle into opening (Diagram 2) then turn clockwise 90 degrees so
upper handle grip is facing back.
3. With handle firmly in place, twist locking collar clockwise until cord wrap on collar is on the back of the vacuum
(Diagram 4). NOTE: Your upper and lower cord wrap should both be located on the back of the unit (Diagram #a).
4. Insert floor tool into dirt cup nozzle (Diagram 5).
HOW TO USE AS A HAND VAC
1.
Remove handle bv turnina collar a full turn counter clockwise (Diaqram 1).
- - -
- . -
2. Turn upper hand~; grip t< the left 90 degrees (Diagram 2). NOTE: ~ o u r cord wrap hook should now be located on the
side of the handle.
3.
Remove handle from the body of unit (Diagram 3).
4. Remove floor tool from dirt cup nozzle (Diagram 4).
5. To attach crevice tool, insert crevice tool into the dirt cup nozzle (Diagram 5).