Yamaha RX-E600 Owner's Manual
Yamaha RX-E600 Owner's Manual

Yamaha RX-E600 Owner's Manual

Audio receiver
Hide thumbs Also See for RX-E600:
Table of Contents

Advertisement

RX-E600
Receiver
Récepteur
OWNER'S MANUAL
MODE D'EMPLOI
BEDIENUNGSANLEITUNG
BRUKSANVISNING
MANUALE DI ISTRUZIONI
MANUAL DE INSTRUCCIONES

Advertisement

Table of Contents
loading

Summary of Contents for Yamaha RX-E600

  • Page 1 RX-E600 Receiver Récepteur OWNER’S MANUAL MODE D’EMPLOI BEDIENUNGSANLEITUNG BRUKSANVISNING MANUALE DI ISTRUZIONI MANUAL DE INSTRUCCIONES...
  • Page 2 In a cabinet, allow about 10 cm To reduce the risk of fire or electric shock, do not (4 in.) of free space all around RX-E600 for adequate expose this appliance to rain or moisture. ventilation.
  • Page 3: Table Of Contents

    • Multi-function RDS reception • SUBWOOFER output terminal The receiver (RX-E600) and DVD player (DVD-E600) are the main units of the YAMAHA Piano Craft Series. You can upgrade the system by adding the cassette deck (KX-E300) and MD recorder (MDX-E300)*.
  • Page 4: Supplied Accessories

    SUPPLIED ACCESSORIES After unpacking, check that the following parts are contained. • AM loop antenna • Remote control POWER +100 FREQ/RDS MODE–PTY SEEK–START RANDOM PROG TIME TAPE DIRECTION PRESET TUNER PRESET TAPE • Indoor FM antenna TAPE REC/PAUSE REC/PAUSE MODE DUBBING START SLEEP...
  • Page 5: Getting Started Remote Control

    GETTING STARTED Remote control operation range Remote control VOLUME The remote control for the RX-E600 also controls the NATURAL SOUND STEREO RECEIVER RX–E600 STANDBY/ON DVD-E600 DVD player, KX-E300 cassette deck, and the DISPLAY MEMORY AUTO/MAN'L PRESET/BAND PRESET/TUNING TIMER MDX-E300 MD recorder. Operating buttons for each unit...
  • Page 6: Connecting The Speakers And Antennas

    GETTING STARTED Connecting the speakers and antennas Do not connect the AC power cord to the wall outlet until all connections have been completed. Follow the steps as shown below to connect the system using the supplied cords and accessories. Be sure all connections are made correctly, that is to say L (left) to L, R (right) to R, “+”...
  • Page 7: Connecting The System

    Connect ‰ to ‰ using the Audio pin cable. Insert the plugs into the jacks of the same color. Connect the SYSTEM CONNECTOR (DVD) of the RX-E600 and the SYSTEM CONNECTOR (RECEIVER) of the DVD-E600 with a system control cable (supplied with the DVD-E600).
  • Page 8: Setting The Clock

    GETTING STARTED Setting the clock You must set the clock before you use the timer functions. The clock is based on a 24-hour system. DISPLAY STANDBY/ON HOUR VOLUME NATURAL SOUND STEREO RECEIVER RX–E600 STANDBY/ON DISPLAY MEMORY AUTO/MAN'L PRESET/BAND PRESET/TUNING TIMER TIMER ADJ TIMER HOUR...
  • Page 9: Names Of Buttons And Controls

    NAMES OF BUTTONS AND CONTROLS Front panel 3 4 5 6 7 8 VOLUME NATURAL SOUND STEREO RECEIVER RX–E600 STANDBY/ON PRESET/TUNING DISPLAY MEMORY AUTO/MAN'L PRESET/BAND TIMER TIMER ADJ TIMER HOUR INPUT BASS TREBLE BALANCE PHONES – – 1 STANDBY/ON (P.9) 9 VOLUME (P.9) 2 TIMER indicator (P.15) 0 PHONES (P.9)
  • Page 10: Remote Control

    4 PTY SEEK MODE (P.13/P.14) 5 PTY SEEK START (P.13/P.14) 6 A/B/C/D/E (P.11) 7 PRESET (P.11) +100 8 TUNER (RX-E600) (P.11) FREQ/RDS MODE – PTY SEEK – START 9 MD input (MDX-E300) (P.18) RANDOM PROG 0 TAPE input (KX-E300) (P.18) TIME q DVD input (DVD-E600) (P.17)
  • Page 11: Basic Operations

    STANDBY/ON TREBLE VOLUME the front panel, or POWER on the remote control. • Piano Craft series components that have correct system connections made to RX-E600 can be VOLUME NATURAL SOUND STEREO RECEIVER RX–E600 controlled to turn to the on or standby mode by STANDBY/ON RX-E600.
  • Page 12: Tuning

    TUNING Manual tuning Listening to the radio Follow steps 1 and 2 described in “Automatic You can find radio stations automatically and manually. tuning.” AUTO/MAN’L PRESET/TUNING Press AUTO/MAN’L so that “AUTO” disappears from the display. VOLUME NATURAL SOUND STEREO RECEIVER RX–E600 Press PRESET/TUNING (for a higher...
  • Page 13: Presetting Stations

    TUNING To preset stations automatically Presetting stations Select TUNER as input source by turning INPUT. The unit can store station frequences selected using Press MEMORY for about 2 seconds. Automatic or Manual tuning as presets. Up to 40 stations • The unit starts presetting stations, “AUTO” and can be stored.
  • Page 14: Receiving Rds Stations

    RECEIVING RDS STATIONS Receiving RDS data The name of the RDS station being received is displayed. • If the unit cannot find a station with PS data, the unit stops RDS (Radio Data System) is a data transmission system searching and “NO PS” appears on the display. used by FM stations in many countries.
  • Page 15: Pty Seek Mode

    RECEIVING RDS STATIONS To locate a station PTY SEEK mode Tune in the FM station. (Refer to page 10, or you can You can locate a desired station by selecting a program simply press TUNER on the remote control.) type. The unit searches all preset stations into the type of Press PTY SEEK MODE once so that “PTY”...
  • Page 16: Optional Settings For Rds Functions

    RECEIVING RDS STATIONS • If the unit is tuned to an RDS station of another Optional settings for country the built in clock synchronizes to the time RDS functions of that country. • If the built-in clock is not set to the current time or has been reset due to a power failure or other The tuner has the following functions which make use of incident, it will be set to the time specified by the...
  • Page 17: Using The Built-In Timer

    USING THE BUILT-IN TIMER USING THE BUILT-IN TIMER 3. Timer REC Before using the timer Select the recording component by turning INPUT. If you wish to enjoy timer playback with If you want to use the cassette deck, KX-E300 or the MD the TUNER or AUX settings, select “REC Mode Recorder, MDX-E300 for timer play or recording, you OFF”.
  • Page 18: Sleep Timer

    USING THE BUILT-IN TIMER Sleep timer The unit can be set to automatically place itself in standby mode after a designated time. PRESET TUNER PRESET TAPE TAPE REC/PAUSE REC/PAUSE MODE DUBBING START SLEEP DISPLAY SLEEP VOLUME Play the desired sound source. Press SLEEP repeatedly until the desired sleep time appears in the display.
  • Page 19: System Control

    SYSTEM CONTROL Controlling other components DVD-E600 POWER 1 Numeric buttons • +100 button is used when operating MDX-E300. 2 * (Pause) 3 # (Play) 4 & (Stop) +100 5 $ ! (Skip/Seach Backward) FREQ/RDS MODE – PTY SEEK – START 6 ⁄...
  • Page 20 SYSTEM CONTROL MDX-E300 POWER 1 Numeric buttons 2 REP (Repeat) 3 RANDOM 4 * (Pause) 5 PROG (Program) 6 # (Play) +100 7 ⁄ › (Skip/Search Forward) FREQ/RDS MODE – PTY SEEK – START 8 $ ! (Skip/Search Backward) RANDOM PROG 9 &...
  • Page 21: Before Recording

    REC/PAUSE REC/PAUSE Note • The displays 1~4 which include the component you have MODE DUBBING START DUBBING DUBBING not connected to your receiver (RX-E600) will be skipped. MODE START SLEEP DISPLAY To stop dubbing VOLUME Press &. Note Select a component combination. Each time you •...
  • Page 22: Additional Information

    If it cannot be corrected, or if the fault is not listed in the SYMPTOM column, disconnect the power cord and contact your authorized YAMAHA dealer or service center for help. When receiving service, other Piano Craft components you are using together with this unit may be needed.
  • Page 23 ADDITIONAL INFORMATION SYMPTOM CAUSE REMEDY The remote control does not work. The batteries of the remote control are too Replace the batteries with new ones. weak. Remote control is too far away or is being Use within 6 meters and 60 degree radius. used at an incorrect angle.
  • Page 24: Specifications

    ADDITIONAL INFORMATION Specifications Amplifier section General Minimum RMS output power per channel Power supply ..........55 W + 55 W (6Ω 1kHz 0.1% THD) [U.S.A. and Canada models] ......... AC 120 V, 60 Hz ......40 W + 40 W (6Ω 20 Hz to 20 kHz 0.1% THD) [Australia model] ...........
  • Page 25 DVD-E600 DVD PLAYER LECTEUR DE DVD OWNER’S MANUAL MODE D’EMPLOI BEDIENUNGSANLEITUNG BRUKSANVISNING MANUALE DI ISTRUZIONI MANUAL DE INSTRUCCIONES...
  • Page 26: Important Note

    Important Note Advarsel: Luokan 1 laserlaite + Klass 1 laserapparat Laserrudstråling ved åbning når sikkerhesafbrydere er ude Varoitus! af funktion. Undgå u tsættelse for stråling. Laitteen käyttäminen muulla kuin tässä käyttöohjeessa mainitulla tavalla saattaa altistaa käyttäjän turvallisuusluokan Bemærk: 1 ylittävälle lasersäleilille. Netafbryderen STANDBY/ON er sekundært indkoblet og Huom.
  • Page 27: General Information

    General information CAUTION The unit is not disconnected from the AC power source as long as it is connected to the wall outlet,even if this unit Use of controls or adjustments or performance of itself is turned off.This state is called the standby mode.In procedures other than those specified herein may result in this state,this unit is designed to consume a very small hazardous radiation exposure.
  • Page 28 YAMAHA will not be held responsible for any damage resulting from use of this unit with a voltage other than as specified.
  • Page 29 Contents Introduction Picture CD & MP3 Playback Environmental Information ......2 General Operation........12 Supplied accessories ........2 MP3 & JPEG Navigator ........12 Play Mode ............12 Notes about discs.......... 2 Special JPEG Features....... 13 Cleaning discs ............ 2 Function Introduction ........
  • Page 30: Introduction

    Introduction Thank you for purchasing this unit. This Owner’s Manual Cleaning discs explains the basic operation of this unit. ● When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the centre out. Do not wipe in a The region code for this set is 2.
  • Page 31: Functional Overview

    – connect to DIGITAL INPUT of your your TV AV receiver AC Power Cord – connect to a TV with SCART – connect to the AC outlet of the RX-E600 VIDEO SYSTEM CONNECTOR – connect to Video inputs – connect to the SYSTEM CONNECTOR...
  • Page 32: Remote Control

    Functional Overview Remote Control TOP MENU/RETURN – display the top-level disc – turn this unit ON or go to menu (DVD) / go back to standby-on mode previous menu (VCD) 0-9 numeric buttons MENU – select numbered items in a –...
  • Page 33: Preparation

    Preparation Analog Connections Please refer to the RX-E600 manual for instructions on connecting this unit to Use audio/video cable supplied with this unit to connect the RX-E600 receiver. AUDIO OUT L (left) and R (right) jacks of this unit to corresponding input jacks of your audio equipment such as Stereo amplifier.
  • Page 34: Video Connections

    Preparation Video Connections S-Video terminal <A> S (separate) video connection achieves a clearer picture The player has three types of video output jacks. Use one than composite video connection by separating color of them in accordance with the input jacks of the and luminance when transmitting signals.
  • Page 35: Inserting Batteries Into The Remote Control

    Preparation Inserting batteries into the PAL/NTSC Conversion Remote Control This player is equipped with a PAL/NTSC conversion feature to convert the video output of the disc to match 1 Open the battery cover by pressing in the tab, then lift off your TV system.
  • Page 36: Operation

    Operation SVCD SVCD SVCD SEARCH Basic Playback 1 To search the contents in fast speed, press 2 or 1 for fast 1 Press STANDBY/ON on the front panel to turn on the DVD forward/backward searching. 2 Press 2 or 1 again to increase the speed for searching. player.
  • Page 37: Repeat And Shuffle

    Operation Repeat and Shuffle OSD (On-Screen Display) This function will provide some information about your ● Each time you press REPEAT, the Repeat/Shuffle mode playing disc and a rough transferring speed of the video changes as follows; data on the screen. ●...
  • Page 38: Zoom

    Operation Zoom Changing the Audio Language and/or VCD SVCD SVCD SVCD format The Zoom function allows you to change the image size. 1 Press ZOOM to activate the function. ● Press AUDIO repeatedly to select the different ➜ Use 341 2 to view other parts of the zoomed picture. languages.
  • Page 39: Preview Function

    Operation DISC INTERVAL Preview Function This function is used to divide a disc into six parts by ● Press SCAN to enter previewing menu. regular intervals and display them on one page to help ● Press 34 to highlight “TRACK DIGEST”, “DISC you preview the whole disc.
  • Page 40: Picture Cd & Mp3 Playback

    Picture CD & MP3 Playback This player can playback JPEG format pictures and MP3 MP3 & JPEG Navigator files on a personally recorded CD-R/RW disc or To select a different playback method, follow the steps commercial CD, and is compatible with Kodak Picture below.
  • Page 41: Special Jpeg Features

    Picture CD & MP3 Playback Special JPEG Features Playback with multi-angles When displaying one picture on TV screen ● Press 341 2 to get different effects. Function Introduction 3: Flip the picture vertically. Picture CD is a disc with a collection of JPEG format 4: Flip the picture horizontally.
  • Page 42: Setup Menu

    Setup Menu Basic Operation PROGRAM (not for Picture CD/MP3) 1 press 34 to choose “PROGRAM”. 1 Press SETUP in the STOP mode to enter the Setup Menu. 2 Press 2 to move the cursor to the field of the submenu to 2 Press ENTER/OK to go to the next level submenu or choose the item Input menu.
  • Page 43: Osd Language

    Setup Menu Audio Setup menu OSD LANGUAGE This option is to select a language for information There are items included in Audio Setup Page such as displayed on TV screen. “SPEAKER SETUP”, “DIGITAL AUDIO SETUP”, 1 Press 34 to highlight “OSD LANGUAGE” in the General “EQUALIZER”...
  • Page 44: Digital Audio Setup

    Setup Menu DIGITAL AUDIO SETUP EQUALIZER (Sound Mode) In this menu, you can set up the digital audio output The “EQUALIZER” allows you to select from various signal from the digital jacks, such as coaxial etc. preset modes that control the frequency bands of sound to optimize certain musical styles.
  • Page 45: Video Setup Menu

    Setup Menu Video Setup menu TV DISPLAY There are items included in Video Setup menu such as “TV TYPE”, “TV DISPLAY”, “CLOSED CAPTION”, “COMPONENT”, “PROGRESSIVE” and “PICTURE PANSCAN SETTING”. VIDEO SETUP PAGE TV TYPE LETTERBOX TV DISPLAY CLOSED CAPTIONS COMPONENT PROGRESSIVE PICTURE SETTING 16:9...
  • Page 46: Closed Caption

    QUESTIONS REGARDING OUR VIDEO MONITOR COMPATIBILITY WITH THIS MODEL 525P AND 625P DVD PLAYER, PLEASE CONTACT OUR CUSTOMER SERVICE CENTER. This unit is compatible with the complete line of YAMAHA products, including the projectors DPX-1000, LPX-510 and the plasma monitor PDM-4210E.
  • Page 47: Picture Setting

    Setup Menu PASSWORD SETUP PICTURE SETTING In this menu, you can personalize your picture color by This item is used for the parental control and disc lock. adjusting brightness, contrast, tint and color (saturation). Enter your six digit password when a hint is displayed on 1 Press 34 to highlight “PICTURE SETTING”...
  • Page 48: Preference Setup Menu

    Setup Menu Preference Setup menu DISC MENU language DVD discs are available with multiple disc menu There are options included in this menu such as languages. This option is used to select the default disc “AUDIO”, “SUBTITLE”, “DISC MENU”, “PARENTAL”, menu language.
  • Page 49: Parental Control

    Setup Menu PARENTAL Control DEFAULT Setup Movies on DVDs may contain scenes which are not If problems occur while setting up the DVD player, the suitable for children. Therefore, discs may contain “DEFAULT” function can be used to reset all options to ‘Parental Control’...
  • Page 50: Troubleshooting

    Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, set this unit to the standby mode, disconnect the power cord, and contact the nearest authorized YAMAHA dealer or service center. Problem...
  • Page 51: Specifications

    Specifications PLAYBACK SYSTEM AUDIO PERFORMANCE DVD Video DA Converter 24 bit Video CD & SVCD Signal-Noise (1 kHz) 105 dB Dynamic range (1 kHz) 100 dB PICTURE CD fs 96 kHz 2 Hz- 44 kHz CD-R, CD-RW fs 48 kHz 2 Hz- 22 kHz DVD+R, DVD+RW SVCD...
  • Page 52: Language Code

    Language Code These pages can be used to select other languages.This does not affect the options in “AUDIO”, “SUBTITLE” or “DISC MENU”. Abkhazian 6566 German 6869 Afar 6565 Gikuyu; Kikuyu 7573 Afrikaans 6570 Greek, 6976 Albanian 8381 Guarani 7178 Amharic 6577 Gujarati 7185...
  • Page 53 Language Code These pages can be used to select other languages.This does not affect the options in “AUDIO”, “SUBTITLE” or “DISC MENU”. Maori 7773 Sotho, Southem 8384 Marathi 7782 South Ndebele 7882 Marshallese 7772 Spanish; Castilian 6983 Moldavian 7779 Sundanese 8385 Mongolian 7778...
  • Page 54 YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD18 7GQ, ENGLAND YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN YAMAHA MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA...

This manual is also suitable for:

Pianocraft rx-e600

Table of Contents