Bluetooth (Handsfree Calling And Music Streaming); Bluetooth Operations; Pairing - Sony MEX-BT2900 Operating Instructions Manual

Bluetooth (Handsfree calling
and Music streaming)
Bluetooth operations
3
Set the Bluetooth device to search for
this unit.
A list of detected devices appears in the
display of the device to be connected. This
unit is displayed as "Sony Automotive" on
the device to be connected.
°1
4
If Passkey* input is required on the
display of the device to be connected,
input "0000."
DR.BT30oll
Sony
~
Autom6tiveii'!'ll"""l'
xxxxxxxil
h I
ro. \
r::l
This unit and the Bluetooth device memorize
each other's information, and when pairing is
made, the unit is ready for connection to the
device. If the device supports Bluetooth •
version 2.1, passkey input is not required.
Input passkey.
"0000"
-lI- fo-
XXXX
h I
ro. \
r::l
"0"
flashes and then stays lit after pairing is
complete.
S
Set the Bluetooth device to connect to
this unit.
"lil~" or "B~" appears when the connection is
made.
*
Passkey may be called "passcode:' "PIN code," "PIN
number" or "Password:' etc., depending on the
device.
Notes
• While connecting to a Bluetooth device, this unit
cannot be detected from another device. To enable
detection, enter the pairing mode and search for this
unit from another device.
• It may take time to search or connect.
• Depending on the device, the confirmation display of
the connection appears before inputting the
passkey.
• The time limit for inputting the passkey differs
depending on the device.
• This unit cannot be connected to
a
device that
supports only HSP (Head Set Profile).
Support site
http://esupport.sony.com
http://www.sony.com/mobileAV
..- --:-JJ/
-:;0":-
'--------V
flashing
Pairing
To use the Bluetooth function, the following
procedure is necessary.
o
Pairing
When connecting Bluetooth devices for the
first time, mutual registration is required. This
is called "pairing." Registration is required
only for the first time, as this unit and the
other devices will recognize each other
automatically thereafter. You can pair up to 9
devices. (Depending on the device, you may
need to input a passkey for each connection.)
e
Connection
To use the device after pairing is made, start
the connection. Sometimes pairing allows for
connection automatically.
e
Handsfree calling and Music
streaming
You can talk handsfree and listen to music
when the connection is made.
First, register (pair) a Bluetooth device (cellular
phone, etc.) with this unit. You can pair up to 9
devices. Once pairing is established, there is no
need for pairing again.
1
Place the Bluetooth device within 1 m
(3 ft) of this unit.
2
Press and hold (ill until
"0 "
flashes
(more than 2 seconds).
The unit enters pairing standby mode.
17