Sleep Timer; Tone Control - Teac MC-DX40DAB Owner's Manual

To listen to an external source connected to the AUX IN jack,
<
select AUX.
In AUX mode, the display always shows the clock.
<
If you press and hold the TIME SET button for 2 seconds in CD or
<
Radio mode, the clock will be displayed for a few seconds.
4 Play the source and adjust the volume using the VOLUME
buttons.
Muting
To mute the sound temporarily, press the MUTING button.
Press the MUTING button again to restore the sound.
While muting is engaged, "Muting" blinks on the display.
<
If you change the volume during the muting, the muting will be
<
canceled.
When the function is changed during the muting, the muting will
<
be cancelled.

Tone Control

1. Press the BASS or TREBLE button.
To adjust the level of low frequency sound range, press the BASS
button.
To adjust the level of high frequency sound range, press the
TREBLE button.
2. Within 2 seconds, press the VOLUME buttons to change the
setting.
The level can be adjusted from –4 to +4.
Headphones
For private listening, first reduce the volume level to minimum.
Then insert the plug from your headphones into the PHONES
jack, and adjust the volume using the VOLUME buttons. The
sound from the speakers is cut off while the headphone jack is
inserted.
CAUTION
Always lower the volume level prior to plugging in your
headphones. TO AVOID DAMAGING YOUR HEARING - Do not
place your headphones on your head until after you have
plugged them in.

Sleep Timer

Repeatedly pressing the SLEEP button permits setting an interval
(from 90 down to 10 minutes) after which you want the unit to
automatically turn off and shift into Standby mode.
90 min 80 min
off (Normal display)
Dimmer
You can dim the display using the dimmer button (
This function will be cancelled when the STANDBY/ON button is
<
pressed.
.........
10 min
).
11