Inserting Discs; Storing Discs - Teac PD-H01 Owner's Manual

Inserting discs

As shown in the illustration, hold the disc by its edges with its labeled side up and insert it partway .
Push the disc in further until just before it disappears . It will automatically be drawn in to the slot .
If a disc cannot be inserted properly
If a disc becomes caught or is otherwise difficult to insert, do not push it in forcefully . Press the
EJECT (-) button and remove the disc once before trying to reinsert it . (Pushing a disc forcefully
could damage the unit . )

Storing discs

o Discs should be stored in their cases when not being used . Failure to do so could result in warp-
ing and scratches .
o Do not leave discs in places that are exposed to direct sunlight or that are very humid or hot .
Long exposure to such conditions could warp or degrade discs, making them unplayable .
o Since CD-R/CD-RW discs are more susceptible to the effects of heat and ultraviolet rays com-
pared to ordinary CDs, do not leave them for long periods of time in places that are, for example,
exposed to direct sunlight or near equipment that generate heat .
o Smudges on a disc might cause the sound to skip or degrade the sound quality . Always clean
discs before storing them .
Cleaning discs
o If the side of the disc that has the data encoded on it (unlabeled side) becomes dirty with finger-
prints or dust, use a soft cloth to wipe the surface from the center directly toward the edge .
o Never use record cleaners, antistatic treatments, thinners or similar chemicals to clean discs .
Such chemicals could harm the surface of the disc .
PD-H01_OM_EFS_vA_CS6.indb 11
EN
11
13/01/25 17:06