Husqvarna Automower Operator's Manual page 53

• Proportion first (3-1-6)
When you use two exit sectors: Specify a
percentage to define on how many occasions the
Automower should leave the charging station in
sector 1.
To test the settings in Exit angles: State the value
100 % for Proportion first when sector 1 is to be
tested. State the value 0 % for Proportion first
when sector 2 is to be tested. Place Automower in
the charging station and select the Test OUT
(3-2-5) function. The mower will now leave the
charging station directly according to the settings
under Exit angles. Reset the Proportion first value
when testing is finished. For more information
about Test OUT (3-2-5), see page 57.
Follow loop (3-2)
These functions in this sub-menu are for situations
when the mower needs to be guided to reach remote
areas, to find the charging station more easily, and to
control the mower's operating mode when it is
following the loop. You will also find test functions
here to see how different charge exit settings work
and how the mower finds its way into the charging
station.
• Follow loop out (3-2-1)
This function means that Automower can be set
to follow the boundary wire away from the
charging station to reach a more remote area of
the garden. This function is very useful in
gardens where the front and back are joined by a
passage where the charging station cannot be
placed.
When this function is activated Automower will
follow the boundary wire away from the charging
station in the set direction. It will start mowing
when it reaches the area.
6. Menu functions
Exit angles
Follow loop
Garden shape
Advanced
3-2
Automower from
Follow loop out
Follow loop in
Corridor width
Test IN
Test OUT
3-2-
3012-520
53
™