Husqvarna Auto Mower Operator's Manual page 23

3. Place the cable ends in the connector:
• Open the connector.
• Place the wire in the connector grip.
4. Press the connector together using a pair of pliers.
Press until you hear a click.
5. Cut off any surplus boundary wire. Cut 1-2 cm
above respective connectors.
6. Press the connector onto the metal pin on the
charging station.
IMPORTANT INFORMATION
The right hand connector should be connected
on the right hand metal pin on the charging sta-
tion and vice versa.
24
English-
INSTALLATION
3012-284
3012-264
3012-265
3012-267