Reheating; Timer - GE JKP76GP Use & Care Manual

I
MICROWAVE OVEN
Automatic Cooking Codes
Automatic Cooking Codes 1
through 9 are designed to give you
easy automatic results with a
number of foods.
CODE 1, designed for reheating
foods quickly, turns the oven off
automatically as soon as the sensor
detects steam from the foods.
When CODES 2 through 9 are
selected, the oven determines how
much additional cooking time is
needed after steam has been
sensed, automatically switches to
TIME COOK and signals. The
word "AUTO" on the display is
then replaced by countdown
numbers indicating remaining
cooking time. When the signal is
heard, the oven door may be
opened for stirring, turning or
rotating food.
A guide behind the oven door lists
cooking codes for frequently
prepared fresh or uncooked foods
and appropriate codes are
recommended in the recipes and
Cooking Guide section.
Example:
Place covered food in oven. Touch
AUTO COOK pad.
Touch number pad for desired
code. "CODE 2" shows and
"START" flashes. Touch START.
I
Beep sounds when steam is
sensed and "AUTO" is replaced
by cook time. Rotate or stir food, if
necessary. When done, oven beeps
and stops.
How to Adjust AUTO
COOK Codes to Suit
Your Taste
By simply adding a 1 after any
AUTO COOK code number, you
can set the oven to cook for 20~o
less time than the code would
regularly provide.
For example, if CODE 4 cooks
your seafood more done than you
like it, set CODE 41 next time and
you'll get 20% shorter cooking
time.
If you want a longer cooking time
than a code provides, add a 9 after
the code.
For the seafood in the example
above, CODE 49 would provide
20% longer cooking time than the
regular CODE 4 would provide.
Touch AUTO COOK pad.
Touch number pads 4 and 1 in
that order. "CODE" flashes until
START is touched showing that a
shorter than usual time is preferred.
Touch START. "AUTO" shows
on display. DO NOT OPEN
DOOR until first oven signal,
then rotate dish 1/2 turn if
necessary. Close door and touch
START to finish cooking.
(continued on next page)
21