Jensen VM9223 Operation Manual page 10

VM9223
Setting Options Function
Sub Filter 80Hz Selecting a crossover frequency
sets a cut-off frequency of the sub-
120Hz
woofer's LPF (low-pass filter). The
Crossover frequency setting has no
160Hz
effect if the subwoofer is set to
"OFF".
Bluetooth Sub-menu Features
Setting Options Function
Bluetooth On Enable Bluetooth function.
Off Disable Bluetooth function.
Auto Answer On The unit automatically answers all
incoming calls.
Off Manually answer calls by touching
the "call" button.
Connect Manual Connect the last active mobile
phone by touching the CONNECT
icon when disconnected.
Auto Automatically connect when your
paired phone is in range.
Pairing Code The default code is "1234". Touch
the keypad icon to open the keypad
and enter the pairing code or pass
key required for Bluetooth connec-
tion to your mobile phone. Not all
phones/devices require a pairing
code. The default code is "0000" for
many models.
Rating Sub-menu Features
The DVD system has a built-in parental lock feature to
prevent unauthorized persons from viewing restricted disc
content. By default, the rating system is unlocked. Once
setup, the parental lock is released only by entering the
correct password. Once the password is entered, rating is
available for setup.
Setting Options Function
Password _ _ _ _ Enter a 4-digit password to activate
the "Rating" feature.
Setting Options Function
Rating 1. Kid Safe Select the appropriate rating level
for the intended audience.
2. G
You may override higher ratings by
3. PG
using your password.
4. PG-13
5. PG-R
6. R
7. NC-17
8. Adult
Load Factory Reset Select "Reset" to restore the factory
default settings for all functions
except the Rating system.
To reset the password, access the "RATING" menu and enter
the current password. Once the correct password is entered,
you can access the "Password" field and enter a new one.
NOTE: Record the password and keep it in a safe place
for future reference. The rating for each disc is marked
on the disc, disc packing, or documentation. If the rating
is not available on the disc, the parental lock feature is
unavailable. Some discs restrict only portions of the disc
and the appropriate content will play. For details, please
refer to the disc description.
Hardware Sub-menu Features
Setting Options Function
Camera In Normal
Mirror Reverse the camera image as if
looking through a rear-view mirror.
TFT Auto On The TFT panel automatically opens
Open when the unit is turned on.
Off You must press the OPEN button
(1) to open the TFT panel.
Manual When the ignition is turned OFF, the
TFT panel DOES NOT retract if it
was previously out
Video Input NTSC The color signals are output in the
(Input cir- standard NTSC format.
cuitry autode-
PAL The color signals are output in the
tects the
standard PAL format.
video signal
from the Aux
Auto The color signal output is switched
In source).
automatically based on the current
video input signal - NTSC or PAL.
If the monitor is in display mode, the monitor automatically
switches to CAMERA mode upon reverse driving. When the
8
reverse driving stops, the monitor return to its original input
mode.
P.VOL Sub-menu Features
Setting Options Function
Source Radio Choose a source for which you
would like to increase the relative
Disc
volume (LEVEL).
USB
AUX IN1
AUX IN2
NAVI
BT
Level 0-6 Increase relative volume for speci-
fied source up to 6 decibbels.
TS Cal (Screen Calibration)
To access the "Screen Calibration" function from the SETUP
menu, select the "TS CAL" option.
After entering calibration mode, a crosshair
corner quadrant of the screen. To begin calibration, press and
hold the crosshair for one second until it moves to the next
quadrant. Continue for each quadrant until the calibration is
completed.
DEMO Sub-Menu Features
You can stop/run demonstration mode or turn Demo Auto
Run on/off by choosing the "Demo" option from the SETUP
MENU.
When "Demo Auto Run" is Off, you can select "Demo Mode >
Run" to start Demo Mode. Demo Mode scrolls through the
various source screens, simulating activity on the display.
"Demo Mode" is discreetly displayed in yellow text (below the
clock), to indicate the unit is in Demo Mode. To stop Demo
Mode, press the upper-left quadrant of the TFT (Source
select).
When "Demo Auto Run" is On, the unit will automatically
display Demo Mode when powered on.
Exiting the System Setup Menu
To exit setup mode and resume normal playback, press the
SETUP button (31) on the remote control or touch the BACK
button on the screen.
appears in a