Battery Replacement - Buick Enclave 2008 Owner's Manual

Hide thumbs Also See for Enclave 2008:
Table of Contents

Advertisement

&
(Power Liftgate): Press and hold for about
one second to open and close the liftgate. The taillamps
will flash and a chime will sound to indicate when the
liftgate is opening and closing.
L
(Vehicle Locator/Panic Alarm): Press and release
to locate your vehicle. The turn signal lamps will flash
and the horn will sound three times.
L
Press and hold
for more than two seconds to
activate the panic alarm. The turn signal lamps will flash
and the horn will sound repeatedly for 30 seconds.
The alarm will turn off when the ignition is moved
L
to ON/RUN or
is pressed again. The ignition must
be in LOCK/OFF for the panic alarm to work.
Matching Transmitter(s) to Your
Vehicle
Each RKE transmitter is coded to prevent another
transmitter from unlocking your vehicle. If a transmitter
is lost or stolen, a replacement can be purchased
through your dealer/retailer. All transmitters need to be
re-coded to match the new transmitter.
2-6
The lost transmitter will no longer work after the new
transmitters are re-coded. The vehicle can have a
maximum of eight transmitters matched to it. See
"Relearn Remote Key" under DIC Operation and
Displays on page 3-50 for instructions on how to match
RKE transmitters to your vehicle.

Battery Replacement

Replace the battery if the REPLACE BATTERY IN
REMOTE KEY message displays in the DIC. See
"REPLACE BATTERY IN REMOTE KEY" under DIC
Warnings and Messages on page 3-56 for additional
information.
Notice: When replacing the battery, do not to touch
any of the circuitry on the transmitter. Static from
your body could damage the transmitter.

Advertisement

Table of Contents
loading

Table of Contents