Setting Up A Combo Unit - Universal Electronics Potenza ST User Manual

Device Type:___________________
DVD Code
Device Type:___________________
AUD Code
Device Type:___________________
STB Code
Device Type:___________________
TV Code
Device Type:___________________

SETTING UP A COMBO UNIT

If you own a combo unit such as a TV/VCR Combo or a
TV/DVD Combo, you need to follow special steps to set
it up. Perform the following instructions to control
combo device:
1. For a TV/VCR Combo, turn on your TV/VCR
Combo and insert a video cassette. (For a TV/
DVD Combo, insert a DVD).
2. On the remote control, press VCR once; it will
blink once. Then press and hold SETUP until
the VCR key blinks twice.
3. Use the "Manufacturer's Codes" starting on
page 27 to locate the brand name and enter
the first four-digit code for your combo device
(for example, TV/VCR). If you perform this
procedure correctly, the VCR key will blink
twice.
NOTE: If the VCR key did not blink twice after enter-
ing the codes last digit, repeat steps 2 through
3 and try entering the same code again.
If you've located a setup code that works for
your combo device (for example, a TV/VCR