15.11. Using a 2 inch by ¼ - 20 bolt, lock washer, and
hex nut (not supplied in kit) attach the belt sup-
port bracket to the top of the transaxle using the
empty bolt hole at the left rear of the transaxle.
See Figure 66.
1/8" clearance
Transaxle Pulley
Pivot Shaft
Empty Bolt Hole
NOTE: The guide must be bent to clear the pivot
shaft assembly while maintaining a distance of
1/8th inch of clearance from the transaxle pulley.
16.
ENGINE PULLEY BELT GUIDE KIT
NOTE: Some older units have a flap bracket that
uses removable engine pulley belt guides.
Updated belt guides have been manufactured as
a kit. Part Number 1770557. If your unit uses the
older style guides, obtain the update kit. The kit
Servicing the Troy-Bilt Wide Cut 33" Combination Mower
Belt Support Bracket
Figure 66
contains all installation directions. See Figure
67.
Older Style Guides
NOTE: The latest production of these units uses
a newer flap bracket that integrates the belt
guides into the metal stamping. This newer flap
bracket will NOT fit on older units.
19
Newer Style Guides
Flap Bracket
Figure 67