Table of Contents
Advertisement
15.11. Using a 2 inch by ¼ - 20 bolt, lock washer, and
hex nut (not supplied in kit) attach the belt sup-
port bracket to the top of the transaxle using the
empty bolt hole at the left rear of the transaxle.
See Figure 66.
1/8" clearance
Transaxle Pulley
Pivot Shaft
Empty Bolt Hole
Figure 66
NOTE: The guide must be bent to clear the pivot
shaft assembly while maintaining a distance of
1/8th inch of clearance from the transaxle pulley.
16.
ENGINE PULLEY BELT GUIDE KIT
NOTE: Some older units have a flap bracket that
uses removable engine pulley belt guides.
Updated belt guides have been manufactured as
a kit. Part Number 1770557. If your unit uses the
older style guides, obtain the update kit. The kit
K&T Saw Shop 606-678-9623 or 606-561-4983
www.mymowerparts.com
Servicing the Troy-Bilt Wide Cut 33" Combination Mower
Belt Support Bracket
contains all installation directions. See Figure
67.
Older Style Guides
NOTE: The latest production of these units uses
a newer flap bracket that integrates the belt
guides into the metal stamping. This newer flap
bracket will NOT fit on older units.
19
Newer Style Guides
Flap Bracket
Figure 67
Hide quick links:
Advertisement
Table of Contents
